How far the chosen faces may move, in mm: along X, Y or Z, or the length of the movement (Magnitude).
Faces whose movement is held under the limit, usually from Faces in Solid.
Which part of the movement is held: X, Y, Z or its length (Magnitude).
Farthest the faces may move, in mm.
Values the block gives besides its output. The editor lists them under Properties, and an input can read one by reference.
How far the Solid breaks the rule at each point, 0 where it is met; only there when a Solid is connected.
The steepest overhang allowed, measured against the build plate, in degrees.
The direction the part grows in, normal to the build plate.
The thinnest wall or smallest feature allowed.
The bound a Metric is held to (at most, at least, or equal).