Browse the reference

Rounded Box

An axis-aligned solid box with all edges and corners rounded. Give it a center and size, or two opposite corners.

Inputs

Definition Choice: How the box is sized: a center and three side lengths, or two opposite corners.
Center Point: Center, from a wire; replaces the typed value.
Takes: any block that gives Point (13 blocks)
Length Number: X size, from a wire; replaces the typed value.
Width Number: Y size, from a wire; replaces the typed value.
Height Number: Z size, from a wire; replaces the typed value.
Min Point: One corner, from a wire; replaces the typed value.
Takes: any block that gives Point (13 blocks)
Max Point: Opposite corner, from a wire; replaces the typed value.
Takes: any block that gives Point (13 blocks)
Radius Number: Edge rounding, from a wire; replaces the typed value.

Used by: any block that takes Solid (95 blocks)

Values the block gives besides its output. The editor lists them under Properties, and an input can read one by reference.

BoundingBox Bounding Box: The axis-aligned extent of the Solid.
ScalarField Number: The Solid's signed distance, as a field.
Inverted Solid: The Solid turned inside out: what was inside is now outside.

Clever Design GmbH · Einsiedeln, SwitzerlandPrivacy · Imprint